Feed slot cover,

Load an envelope, short edge first with the flap feed slot cover down, in the center of the rear paper feed slot. When you are ready to print, press the start button. Send your print job from a computer or using the product's touch screen. Load feed slot cover paper or envelope short edge first and printable side faceup. Always follow these loading guidelines: Load an envelope, short edge first with the flap facing down and to the left, in the center of the rear paper feed slot.

Loading Paper in the Rear Paper Feed Slot You can load one sheet of paper, card stock, or other thick media, or one envelope in the rear paper feed slot.

Paper that is too stiff may not load correctly. Load a single sheet of paper or thick media, printable side up and short edge first, in the center of the rear paper feed slot. Leave enough space in front of the product for the paper to be fully ejected.

Chanel o case casino edition

If ink smears when you print on thick paper, you can select the Thick Paper setting to improve print quality. Check the paper specifications.

Moon shadow free slots

Load the paper or envelope short edge first and printable side faceup. If you are printing from the product's control panel, press the start button. Load one sheet or envelope at a time.

Hanksville utah slot canyons

Slide out the paper support. Load a single sheet of paper or thick media, printable side up and short edge first, in the center of the rear paper feed slot.

Flip open the rear paper feed slot cover. You see a message on the LCD screen, then you see instructions for loading paper. Slide the edge guides against the paper or envelope, but not too tightly. Start your print job from a computer or using the product's control panel, selecting Rear Paper Feed Slot as the Paper Source setting. If you are printing from a computer, click Print.

MAXIFY MB2320: Removing a jammed paper: inside the rear cover

Leave enough space in front of the product for the paper to be fully ejected. Load one sheet or envelope at a time. When you are ready to print, press the Start button.

Slide out the paper support. Push it approximately 2 inches 5 cm into the slot. Push it down approximately 2 inches 5 cm into the slot.